This USB Repeater Cable is not a passive extension cable. It is an active device. The USB signals going in and out of the extension cable are buffered to assure signal quality and the meeting of the USB's Electrical and Timing Specifications. Using passive cables for the purpose of extension will result in signal errors and is not recommended.

This USB Repeater Cable allows a USB device to have its cable length extended by up to an additional 80 feet* by serially connecting these 16 foot cables. The USB Repeater Cable acts as a transparent USB Hub and buffers all downstream and upstream data traffic. Both Low-Speed and High-Speed devices will function equally well with the USB Repeater Cable.

* Although it is possible to use multiple USB Repeater Cables in a row (up to 5), users should verify that adding the cables do not affect the operation of the USB device.

Note: There is no difference between this item and the RC2000 in terms of how they operate. Just pick the repeater cable which you think looks better.

Free Shipping within the 48 continental USA states! (Online orders only)

Order yours now for immediate shipping. We accept Visa, Mastercard, American Express, Discover and PayPal though our secure server.

We stand behind our product If you need any assistance, you can call us toll-free for the life of the product for free assistance at 1-800-274-7897 (USA & Canada only), or +1-865-988-7906 for those in other areas.

Product comes with a 1 year warranty, and a 30-day money back guarantee with no restocking fee.

Easily add 8 serial ports to your computer. Just plug this adapter in, and 8 serial ports will map in automatically on your computer through plug-and-play detection.

Once you plug the adapter in, 8 serial ports will be automatically detected and installed. The ports will map in as standard RS-232 serial ports and function just like native serial ports. No additional IRQs or memory is required on the system for the serial ports. Each port can be individually configured. All 8 ports can be used at the same time, or at different times.

Specifications & Features:

• Adds 8 RS-232 serial ports via a USB 1.1 or 2.0 connection
• Ports can be set at speeds of 300 bps to 230,400 bps per serial port
• Provides a 384 byte receive FIFO on each serial port.
• Provides a 128 byte transmit FIFO on each serial port for high speed data throughput.
• Doesn't require any IRQ, DMA or I/O port.
• RS-232 data signals: DCD, RxD, TxD, DTR, GND, DSR, RTS, CTS, RI.
• Serial Connectors: DB-9 male connectors
• Uses an Prolific brand chipset.
• Virtual COM port drivers provided for Windows 98, 98SE, ME, 2000, 2003, XP, Vista & 7. Not recommended for MAC or Linux as the serial ports map in in a random order each time the adapter is plugged in.

Windows 7 drivers are not on the included CD, but can be downloaded from here: http://www.prolific.com.tw/eng/downloads.asp?ID=31

Package Contents:

• USB to 8-port RS232 serial adapter
• Octopus cable with 8 9-pin male serial connectors
• 6' USB cable
• CD-ROM disc with drivers

Description:

The USB parallel adapter cable is constructed to meet all the USB to IEEE 1284 specification requirements. This product is essentially a flexiable cable that utilizes hardware and software to provide intelligent and transparent protocol conversion between Universal Serial Bus (USB) on the PC side and IEEE 1284 parallel on the printer side. It will allow any Windows computer with a USB port to print to nearly any parallel printer. (Please note that the printer needs to have a standard IEEE 1284 connector (also known as a 1284B connector). It will not work with 1284C connectors (the subminiature sized ones). Most printers have the 1284B connectors. Also, it will not work with non-printer type parallel devices.)

If you aren't sure if your printer has a standard IEEE 1284 connector (1284B), here is some information to help you determine it. Many printers that have a IEEE 1284B connector are listed below. If your printer isn't listed, please verify that it has a 1284B connector type before ordering. To help you determine if you have a 1284B or 1284C connector, the length of the 1284B connector is 1 7/8 inches long. Here is the list of printers which we know have the 1284B connection and are compatible with this adapter:

HP DeskJet Models - 420, 500C, 520C, 670C, 692C, 695C, 710C, 750, 850C, 870C, 890C, 895, 1100C, 1120C

HP LaserJet Models - III P, 4, 4 PLUS, 4P, 4L, 4V, 5, 5P, 5L, 5M, 6P, 6L, 2000c, 2100M, 4000, 5000 (Please note: It has been reported that some of the 4L printers have a 1284B connector and some have a 1284C connector. If you have a 4L, please ensure that the connector on your printer measures 1 7/8" across before placing your order.)

Cannon BJC Models - BJC-30, BJC-70, BJC-80, BJC-200, BJC-200eX, BJC-210, BJC-210SP, BJC-230, BJC-240, BJC-250, BJC-255sp, BJC-4000, BJC-4100, BJC-4200sp, BJC-4300, BJC-4650, BJC-6000, BJC-7000

Epson Models - Stylus Color 300, Stylus Color 400, Stylus Color 440, Stylus Color 600, Stylus Color 740, Stylus Color 800, Stylus Color 850, Stylus Photo 700, Stylus Photo EX, PM-700C, PM-750C, PM-2000C, EPL-N1600

Lexmark Models - XJ-350, 1100... Not compatible with the Lexmark Z11.

Panasonic Model - KX-1121

NOTE: USB to Parallel Cables will only work with printers, and not other types of parallel devices, as they map in as "USB Printing Support", not as a true parallel port. If you need a true parallel port, please look at our PCMCIA Parallel Cards, our Parallel Expresscards or our PCI-bus Parallel cards (some notebook computers use PCMCIA cards, and some use ExpressCards. Most desktop computers use PCI-bus cards or PCIe cards.)

Features:

Settable to COM1-COM99.

This version does not come with a cable. You would normally only purchase the card this way if you already have one of our octopus cables or COM-BOXes for some reason.

Uses only 1 IRQ and can share an interrupt with other plug & play devices in your system.

Designed for use with Windows 95, 98, ME, 2000, XP, Vista, 7, 8, 10, NT 4.0, DOS, Linux kernel 2.0.xx and later & OS/2.

Free Shipping within the 48 continental USA states! (Online orders only)

Order yours now for immediate shipping. We accept Visa, Mastercard, American Express, Discover and PayPal though our secure server.

We stand behind our product If you need any assistance, you can call us toll-free for the life of the product for free assistance at 1-800-274-7897 (USA & Canada only), or +1-865-988-7906 for those in other areas.

Product comes with a 1 year warranty, and a 30-day money back guarantee with no restocking fee.

The PCI-200L-i is designed for RS232, RS422/485 industrial communications. It supports 2 independent RS232, RS422 or RS485 ports. Each port can be configured separately.

Available modes :
RS232, RS422 full duplex
RS485 full duplex (4 wire)
RS485 half duplex (2 wire) with and without echo.

In RS485 modes applications enable transmission by simply sending data. This is done by ART (Automatic Receive Transmit Control) intelligence. The Transmitter is disabled exactly with the end of the last character sent. No modification is necessary in programs. The common control by RTS is possible for compatibility. In addition, hardware flow control and built-in termination resistors guarantee data integrity. Surge protection is also available for RS232 Signals to deliver high reliability. All of these features make the PCI-200I suitable for harsh industrial applications.

APPLICATIONS:

The PCI-400I is designed for RS232, RS422/485 industrial communications. It supports 4 independent RS232, RS422 or RS485 ports. Each port can be configured separately.

Available modes :
RS232, RS422 full duplex
RS485 full duplex (4 wire)
RS485 half duplex (2 wire) with and without echo.

In RS485 modes applications enable transmission by simply sending data. This is done by ART (Automatic Receive Transmit Control) intelligence. The Transmitter is disabled exactly with the end of the last character sent. No modification is necessary in programs. The common control by RTS is possible for compatibility. In addition, hardware flow control and built-in termination resistors guarantee data integrity. Surge protection is also available for RS232 Signals to deliver high reliability. All of these features make the PCI-400I suitable for harsh industrial applications.

APPLICATIONS:

Settable to COM1-COM99.

Provides 8 DB25 (25-pin male) serial connectors via an included cable & COM-BOX that plugs on to the back of the card.

Uses only 1 IRQ and can share an interrupt with other plug & play devices in your system.

Designed for use with Windows 95, 98, ME, 2000, XP, Vista, 7, 8, 10, NT 4.0, DOS, Linux kernel 2.0.xx and later & OS/2.

Free Shipping within the 48 continental USA states! (Online orders only)

Order yours now for immediate shipping. We accept Visa, Mastercard, American Express, Discover and PayPal though our secure server.

We stand behind our product If you need any assistance, you can call us toll-free for the life of the product for free assistance at 1-800-274-7897 (USA & Canada only), or +1-865-988-7906 for those in other areas.

Product comes with a 1 year warranty, and a 30-day money back guarantee with no restocking fee.

The PCI-200L-i-SI is designed for RS232, RS422/485 industrial communications. It supports optical isolation and surge protection. It supports 2 independent RS232, RS422 or RS485 ports. Each port can be configured separately.

Available modes :
RS232, RS422 full duplex
RS485 full duplex (4 wire)
RS485 half duplex (2 wire) with and without echo.

In RS485 modes applications enable transmission by simply sending data. This is done by ART (Automatic Receive Transmit Control) intelligence. The Transmitter is disabled exactly with the end of the last character sent. No modification is necessary in programs. The common control by RTS is possible for compatibility. In addition, hardware flow control and built-in termination resistors guarantee data integrity. Surge protection is also available for RS232 Signals to deliver high reliability. All of these features make the PCI-200I suitable for harsh industrial applications.

APPLICATIONS:

This IEEE 1394 to IDE External Case allows you to upgrade 2.5" IDE disk drives to IEEE 1394 ATAPI host commands. Provides the ability to upgrade and support a variety of ATA/ATAPI based 2.5" disk drives without changing the peripheral hardware.

Features

Package Contents

Specifications

Supported O.S. Functions IEEE 1394 to 2.5"IDE External Case(Aluminum/Plastic) O.S. Win 98se Built-In O.S. Win ME Built-In O.S. Win 2000 Built-In O.S. Win XP Built-In O.S. Mac OS Built-In O.S.

Free Shipping within the 48 continental USA states! (Online orders only)

Order yours now for immediate shipping. We accept Visa, Mastercard, American Express, Discover and PayPal though our secure server.

We stand behind our product If you need any assistance, you can call us toll-free for the life of the product for free assistance at 1-800-274-7897 (USA & Canada only), or +1-865-988-7906 for those in other areas.

Product comes with a 1 year warranty, and a 30-day money back guarantee with no restocking fee.

This IEEE 1394 to IDE External Case allows you to upgrade 3.5" IDE disk drives to IEEE 1394 ATAPI host commands. Provides the ability to upgrade and support a variety of ATA/ATAPI based 3.5" disk drives without changing the peripheral hardware.

Features

System Requirements

Package Contents

Specifications

Functions		IEEE 1394 3.5" IDE External Case
O.S.	Win 98se	Built-In O.S.
	Win ME	Built-In O.S.
	Win 2000	Built-In O.S.
	Win XP	Built-In O.S.
	Mac OS	Built-In O.S.

The USB 2.0 High-Speed Hub has 4 ports that will connect to either the USB revision 2.0 high-speed or the USB revision 1.1 peripheral devices. This high-speed hub allows you to add multiple high performance USB 2.0 peripherals to the PC or MAC. Moreover, this product is fully backward compatible with the USB revision 1.1 products, meaning your previously invested USB 1.1 devices can continue to function as usual. The USB 2.0 High-Speed Hub is fully compliant with the USB 2.0 specifications, which permits you to connect up to a maximum of 127 USB devices to your PC through daisy-chain. Furthermore, with its increased bandwidth of 480 Mbps (exceeding that of IEEE 1394 FireWires with 400 Mbps), this hub will allow you to connect devices that consume a great deal of bandwidth, such as, external storage devices, scanners, DVD drives, CD-RW drives, MO (Magneto-Optical) drives, and digital cameras/camcorders to your computer.

Features

The USB 2.0 High-Speed Hub has 4 ports that will connect to either the USB revision 2.0 high-speed or the USB revision 1.1 peripheral devices. This high-speed hub allows you to add multiple high performance USB 2.0 peripherals to the PC or MAC. Moreover, this product is fully backward compatible with the USB revision 1.1 products, meaning your previously invested USB 1.1 devices can continue to function as usual. The USB 2.0 High-Speed Hub is fully compliant with the USB 2.0 specifications, which permits you to connect up to a maximum of 127 USB devices to your PC through daisy-chain. Furthermore, with its increased bandwidth of 480 Mbps (exceeding that of IEEE 1394 FireWires with 400 Mbps), this hub will allow you to connect devices that consume a great deal of bandwidth, such as, external storage devices, scanners, DVD drives, CD-RW drives, MO (Magneto-Optical) drives, and digital cameras/camcorders to your computer.

Function

Features

The IEEE 1394 Repeater Hub is what you want if you need to connect more FireWire peripherals over a long distance. This also allows a single FireWire cable to extend its length from 15 ft to 225 ft via one repeater hub to another.

Features

USB KVM 2-Port Switch

	Description: Provides access to multiple computers from one keyboard, video and mouse with additional 4 USB hub ports. Introduction: The USB KVM Switch 2 Port can access multiple computers from one keyboard, video and mouse with additional 4 USB hub ports giving you the option of either using a USB or PS/2 keyboard or mouse or share different USB peripherals. Operation is as simple as pressing a button on the front panel and entering hot-key command. This family of products is multi-platform compatible with both PC and Mac. Features: Compliant with Standard Specification of USB 1.1 Supports both UHCI and OHCI USB interface Manage multiple PC, G3/G4 Mac, or iMac platforms from one USB or PS/2 keyboard, video and USB or PS/2 mouse Supports hot-swappable Provides PS/2 Style keyboard and PS/2 style mouse legacy interface Use push buttons or hot key control (PS/2 keyboard only) for easy computer selection Supports Plug & Play specification No Windows software driver needed for PS/2 keyboard and PS/2 mouse operation Mac users need to install a software driver for PS/2 keyboard and PS/2 mouse operation Support auto scan function High resolution VGA port of up to 1920x1440 with bandwidth of 200 Mhz Supports USB Self-Powered mode Buzzer sound indicator during port switching confirmation

Click here for VGA cables. (The KVM switch has female VGA connectors.)

Free Shipping within the 48 continental USA states! (Online orders only)

Order yours now for immediate shipping. We accept Visa, Mastercard, American Express, Discover and PayPal though our secure server.

We stand behind our product If you need any assistance, you can call us toll-free for the life of the product for free assistance at 1-800-274-7897 (USA & Canada only), or +1-865-988-7906 for those in other areas.

Product comes with a 1 year warranty, and a 30-day money back guarantee with no restocking fee.

USB KVM 4-Port Switch

	Description: Provides access to multiple computers from one keyboard, video and mouse with additional 4 USB hub ports. Introduction: The USB KVM Switch 4 Port can access multiple computers from one keyboard, video and mouse with additional 4 USB hub ports giving you the option of either using a USB or PS/2 keyboard or mouse or share different USB peripherals. Operation is as simple as pressing a button on the front panel or entering a hot-key command. This family of products is multi-platform compatible with both PC and Mac. Features: Compliant with Standard Specification of USB 1.1 Supports both UHCI and OHCI USB interface Manage multiple PC, G3/G4 Mac, or iMac platforms from one USB or PS/2 keyboard, video and USB or PS/2 mouse Supports hot-swappable Provides PS/2 Style keyboard and PS/2 style mouse legacy interface Use push buttons or hot key control (PS/2 keyboard only) for easy computer selection Supports OSD (On Screen Display) Supports Plug & Play specification No Windows software driver needed for PS/2 keyboard and PS/2 mouse operation Mac users need to install a software driver for PS/2 keyboard and PS/2 mouse operation Support auto scan function High resolution VGA port of up to 1920x1440 with bandwidth of 200 Mhz Supports USB Self-Powered mode Buzzer sound indicator during port switching confirmation

Click here for VGA cables. (The KVM switch has female VGA connectors.)

Free Shipping within the 48 continental USA states! (Online orders only)

Order yours now for immediate shipping. We accept Visa, Mastercard, American Express, Discover and PayPal though our secure server.

We stand behind our product If you need any assistance, you can call us toll-free for the life of the product for free assistance at 1-800-274-7897 (USA & Canada only), or +1-865-988-7906 for those in other areas.

Product comes with a 1 year warranty, and a 30-day money back guarantee with no restocking fee.

KVM 4-Port Switch

	Description: Provides access to multiple computers from one keyboard, video and mouse. Introduction: The KVM Switch 4 Port can access multiple computers from one keyboard, video and mouse. There is no interface card or software to configure. Installation is as easy as connecting cables between KVM Switch 4 Port and your computers. Operation is as simple as pressing a button on the front panel or entering hot-key command via the keyboard. Features: Supports Microsoft Intellimouse, Microsoft Intellimouse Pro, Logitech Net Mouse, and more. High Video quality up to 1920x1440 with bandwidth of 200Mhz Hot-key function allows easy computer access Auto Scan Mode automatically selects computers sequentially Keyboard states automatically saved and restored upon switching No Software Required – easy PC selection via push buttons Beep sounds for switching port confirmation Supports hot-swappable Provides an OSD (On-Screen Display) which allows you to change the password, view which computer is currently selected, select a different computer to be active and shows which computers are currently powered on. The KVM also allows you to change the system names from the default of "SYSTEM 01", "SYSTEM 02", etc. to your preferred names (up to 8 characters).

Click here for VGA cables. (The KVM switch has female VGA connectors.)

Free Shipping within the 48 continental USA states! (Online orders only)

Order yours now for immediate shipping. We accept Visa, Mastercard, American Express, Discover and PayPal though our secure server.

We stand behind our product If you need any assistance, you can call us toll-free for the life of the product for free assistance at 1-800-274-7897 (USA & Canada only), or +1-865-988-7906 for those in other areas.

Product comes with a 1 year warranty, and a 30-day money back guarantee with no restocking fee.

The IrDA-USB Adapter offers the best solution to enable your computer to connect wirelessly to various mobile devices, without the need to use proprietary cables specific to each device.

Complete Windows 98/SE, ME, 2000, XP drivers are included. Also supported by Windows Vista & 7 32 & 64-bit, Windows will automatically search Windows update and install the appropriate driver. (Requires an Internet connection for the install.)

Features & Specifications:

USB 2.0 to RJ45 10/100 Fast Ethernet Converter Adapter USB 2.0 Ethernet Adapter offers the most convenient and efficient way to connect with a laptop or desktop computer to an Ethernet network. Make the connection as easy by plugging one end of the cable into the RJ45 receptacle of the Ethernet Adapter and the other end into one port of the supporting hub.

Compliant with the Standard Specification of USB 1.1 and 2.0 IEEE 802.3u 100BASE-T, TX Compatible USB 2.0 to 10/100Mbps Fast Ethernet Full/High Speed USB 2.0 Device with bus power capability Support 4 endpoints on USB; full-duplex or half-duplex operation on Fast Ethernet Support automatic loading of Ethernet ID, USB Descriptor and Adapter Configuration Supports suspended mode and remote wakeup Upstream port : USB type A plug; downstream port : RJ45

USB specification revision 2.0 compliant  Support TCP/IP , NetBEUI , IPX/SPX protocols Support USB suspend/resume detection logic , wake-up frame , Link starts change  Support up to 32KB external , 2KB internal SRAM

Available USB port Windows 98 / ME / 2000 / XP / Vista

USB 2.0 10/100 Ethernet adapter Installation CD

Free Shipping within the 48 continental USA states! (Online orders only)

Order yours now for immediate shipping. We accept Visa, Mastercard, American Express, Discover and PayPal though our secure server.

We stand behind our product If you need any assistance, you can call us toll-free for the life of the product for free assistance at 1-800-274-7897 (USA & Canada only), or +1-865-988-7906 for those in other areas.

Product comes with a 1 year warranty, and a 30-day money back guarantee with no restocking fee.

The USB 2.0 Hi-Speed 2+1 port PCI Host Card supports a transmission rate of up to 480 Mbps (Megabits per second) to give better performance (40 times faster than USB 1.1 of 12 Mbps and also compared to 400 Mbps transmission rate of IEEE 1394 FireWires) and allows the connection of multiple devices to function simultaneously. It is fully backward compatible with USB Revision 1.1 devices. Uses an NEC chipset.

Features

• Compliant with universal serial bus specification revision 2.0 (Data Rate 1.5/12/480 Mbps)
• Compliant with open host controller interface specification for USB Rev1.0A/1.1/2.0
• PCI multifunction device consists of two (2) OHCI cores for full speed and low-speed signaling, plus one (1) EHCI core for high-speed signaling
• High-speed up to 480 Mbps (Mega bits per second) data transfer rate
• Supports PCI-Bus Power Management Interface Specification release 1.1
• Operational registers direct-mapped to PCI memory space
• Legacy support USB 1.X and 2.0 specifications
• Root Hub with 3(max) downstream facing ports which are shared by OHCI and EHCI Host Controller core
• Link up to 127 USB devices
• Supports Windows 98 / ME / 2000 / XP/ Vista / Mac 10.1 or above

System Requirements

• IBM compatible Pentium-233MHZ or faster & Mac PC
• 64 MB RAM or more
• Available PCI slot with Revision 2.2
• Systems with OS: MS Windows 98 / ME / 2000 / XP/Mac 10.1 or above

Package Contents

• The USB2.0 PCI Host Card................1pcs
• Software CD Driver ..........................1pcs
• User's Manual...................................1pcs

Specifications

• 2 external USB Port (Type A, Female)
• 1 Internal USB Port (Type A, Female)
• PCI Specification Version 2.2

Free Shipping within the 48 continental USA states! (Online orders only)

Order yours now for immediate shipping. We accept Visa, Mastercard, American Express, Discover and PayPal though our secure server.

We stand behind our product If you need any assistance, you can call us toll-free for the life of the product for free assistance at 1-800-274-7897 (USA & Canada only), or +1-865-988-7906 for those in other areas.

Product comes with a 1 year warranty, and a 30-day money back guarantee with no restocking fee.

5 PORT USB 2.0 Hi Speed PCI Controller Card The USB 2.0 PCI 5 Port is a high-speed Universal Serial Bus (USB) host adapter. It works with all types of USB devices including digital cameras, video cameras, printers, scanners, joysticks and more. With hot-swapping feature, it allows you to attach/remove USB devices without having to re-configure settings or turn your system off.  With this USB 2.0 PCI 5 port, you can enjoy instant, no hassle new peripheral connections and expansions.

Compliant with Universal Serial Bus Specification Revision 2.0 (Data Rate 1.5/12/480 Mbps) Compliant with Open Host Controller Interface Specification for USB Rev 1.0a Compliant with Enhanced Host Controller Interface Specification for USB Rev 0.95 PCI multi-function device consists of two OHCI Host Controller cores for full-/low-speed signaling and one EHCI Host Controller cores for high-speed signaling 32-bit 33 MHz host interface compliant to PCI Specification release 2.2 Supports PCI-Bus Power Management Interface Specification release 1.1 All downstream forcing ports can handle high-speed (480 Mbps), full-speed (12 Mbps), and low-speed (1.5 Mbps) transaction Supports up to 127 USB Devices 4 External and 1 Internal Ports Over current protection, each port 500mA USB-A connector Plug & Play and Hot Swapping functions . ALI chipset

Windows 98SE/ME/2000/XP/VISTA

Free Shipping within the 48 continental USA states! (Online orders only)

Order yours now for immediate shipping. We accept Visa, Mastercard, American Express, Discover and PayPal though our secure server.

We stand behind our product If you need any assistance, you can call us toll-free for the life of the product for free assistance at 1-800-274-7897 (USA & Canada only), or +1-865-988-7906 for those in other areas.

Product comes with a 1 year warranty, and a 30-day money back guarantee with no restocking fee.

This USB 2.0 3-Port PCI Card is a high-speed 480 Mbps USB 2.0 host card supporting the new USB 2.0 peripherals and all the existing USB 1.1 devices. The card adds two external and one internal USB 2.0 high-speed ports to your PC. With 40 times faster throughput than USB 1.1 ports and 20% faster than FireWire ports, the USB 2.0 port supports data rates up to 480 Mbps. The card is an ideal choice for external storage devices, MP3 players, CDRs, CDRWs, scanners, digital cameras, webcams, networking and video devices, and all other USB devices.

The USB 2.0 3-Port PCI card incorporates an intelligent host controller designed by NEC Corp. With the addition of this USB 2.0 3-Port PCI card, you will add three high-speed USB 2.0 ports to your computer while maintaining backward compatibility with USB 1.0 and 1.1 devices. The card can automatically detect the USB standard of each connected device, and works with the device at the correct speed.

The USB 2.0 3-Port PCI Card includes high-performance USB 2.0 drivers for Windows 98 SE, ME, 2000, XP & Vista to optimize the performance of USB 2.0 ports.

Features & Specifications:

• Two external and one internal USB 2.0 ports
• EHCI based 480 Mbps USB 2.0 compliant.
• OHCI based 12 Mbps USB 1.1 compliant
• USB ports auto speed selectable
• Each port supplies 500mA power
• Supports both USB 2.0 & 1.1 devices.
• Easy plug & play installation and device connection.
• Fully backward compatible with USB 1.1/1.0 devices.
• Works in any PCI-bus 3.3-volt or 5-volt slot.
• VIA chipset.
• USB 2.0 high-speed drivers for Windows 98 SE, ME, 2000 & XP.

  Please note that this card is a low-profile card. This means that the angle bracket on the back side of the card is shorter than a normal angle bracket, and is intended for systems requiring "low profile" cards.

If you need USB cables, click here.

Free Shipping within the 48 continental USA states! (Online orders only)

Order yours now for immediate shipping. We accept Visa, Mastercard, American Express, Discover and PayPal though our secure server.

We stand behind our product If you need any assistance, you can call us toll-free for the life of the product for free assistance at 1-800-274-7897 (USA & Canada only), or +1-865-988-7906 for those in other areas.

Product comes with a 1 year warranty, and a 30-day money back guarantee with no restocking fee.

Introduction:

This USB Serial Adapter is designed to make industrial communication port expansion quick and simple. Connecting to a USB port on your computer or USB hub, this USB Serial Adapter instantly adds a serial communication port to your system with easy plug-and-play and hot-plug features.

Plugging the USB Serial Adapter into the USB port, the adapter is automatically detected and installed. There is no IRQ & COM port conflicts, since the port doesn't require any additional IRQ, DMA or memory on the system. The RS-232 serial port functions as a native Windows COM port, and it is compatible with Windows serial communication applications.

This USB Serial Adapter provides instant connectivity to RS-232 communication devices for factory automation, multi-drop data collection devices, barcode readers, time clocks, scales, data entry terminals, ATMs and serial communications in harsh enviornments. This USB Serial Adapter is suitable for remote access, retail and industrial application, data collection and other applications requiring a high speed RS-232 communication port.

Specifications & Features:

• Adds a high speed RS-232 serial port via USB connection
• 384 byte receive buffer.
• 128 byte transmit buffer for high speed data throughput.
• Requires no IRQ, DMA or I/O port.
• Data rate speed range: 300 bps to 921,600 bps
• Serial Connector: DB-9 male connector
• RS-232 data signals: DCD, RxD, TxD, DTR, GND, DSR, RTS, CTS, RI.
• LEDs which show transmitting and receiving of data.
• Easily mountable.
• Metal housing.
• Dimensions of 57×72×22 mm³ (W×L×H) or 82×77×22 mm³ with DB9 connector and ears.
• Virtual COM port drivers provided for Windows 10, 8, 7, Vista, XP, ME, 98, Server 2012, Server 2008, Server 2003, CE.NET (version 4.2 and greater), or RT in 32-bit or 64-bit installations. Also supports Linux, MAC OS X, MAC OS 9, MAC OS 8, Android.

Package Contents:

• USB to serial adapter
• 3' USB cable
• CD-ROM disc with drivers
• User's Manual

Free Shipping within the 48 continental USA states! (Online orders only)

Order yours now for immediate shipping. We accept Visa, Mastercard, American Express, Discover and PayPal though our secure server.

We stand behind our product If you need any assistance, you can call us toll-free for the life of the product for free assistance at 1-800-274-7897 (USA & Canada only), or +1-865-988-7906 for those in other areas.

Product comes with a 1 year warranty, and a 30-day money back guarantee with no restocking fee.

Introduction:

The USB Industrial I/O Adapter is designed to make industrial communication port expeansion quick and simple. Connecting to a USB port on your computer or USB hub, this USB Industrial I/O Adapter instantly adds an industrial multi-electrical interface serial communication port to your system. By taking advantage of the USB bus, this USB Industrial I/O Adapter makes it easier than ever to add a RS-422 or RS-485 serial device to your system with easy plug-and-play and hot plug features.

Plugging the USB Industrial I/O Adapter into the USB port, the adapter is automatically detected and installed. There is no IRQ & COM port conflicts, since the port doesn't require any additional IRQ, DMA or memory on the system. The RS-422/485 port functions as a native Windows COM port, and it is compatible with Windows serial communication applications. Each port is individually configurable.

This USB to Industrial I/O Adapter provides instant connectivity to 422/485 communication devices for factory automation, multi-drop data collection devices, barcode readers, time clocks, scales, data entry terminals, PC to PC long distance communications, ATMs and serial communications in harsh enviornments. This USB to Industrial I/O Adapter provides an industrial solution for applications requiring a single node or multi-drop communications over short and long distances.

Optical Isolation & Surge Protection

Optical isolation and surge protection are supported by the USB-COMi-SI-M.

The RS-422/485 port is optically isolated with 2000 volt DC optical isolation. The optical isolation protects your PC or notebook from spikes and surges on the RS-422/485 network by converting the elctrical pulse into an optical signal and then changing it back to an electical pulse. Your computer is well protected, since the surges and spikes cannot cross the optical link.

The RS-422/485 port is protected by a surge protector to withstand electrostatic discharges and power surges up to 25KV ESD. Surge suppression on all signals prevents damage caused by lightning or high voltages.

Specifications & Features:

• Adds a high speed RS-422/485 serial port via USB connection
• 384 byte receive buffer.
• 128 byte transmit buffer for high speed data throughput.
• The RS-422/485 port is optically isolated with 2000 Volt DC optical isolation.
• The RS-422/485 port is protected by surge protection to withstand electrostatic discharge and power surges up to 25KV ESD.
• Requires no IRQ, DMA or I/O port.
• Data rate speed range: 300 bps to 921,600 bps
• Serial Connector: one DB-9 male connector, and one 6-pin Terminal Block
• Supports RS-422 Full Duplex, RS-485 Half Duplex and RS-485 Full Duplex modes.
• Auto transmit buffer control for 2-wire RS-485 half-duplex operation.
• Termination resistors installed on-board.
• RS-422 data signals: Tx-, Tx+, Rx+, Rx-, GND, RTS-, RTS+, CTS+, CTS-.
• RS-485 data signals: Rx-, Tx+, Rx+, Rx- (r wire), and data-, data+ (2 wire).
• Provides LEDs which show transmitting and receiving of data.
• External 4-pin dip switch to set RS-422 or RS-485 modes.
• Easily mountable.
• Metal housing.
• Dimensions of 57×72×22 mm³ (W×L×H) or 82×77×22 mm³ with DB9 connector and ears.
• Virtual COM port drivers provided for Windows 10, 8, 7, Vista, XP, ME, 98, Server 2012, Server 2008, Server 2003, CE.NET (version 4.2 and greater), or RT in 32-bit or 64-bit installations. Also supports Linux, MAC OS X, MAC OS 9, MAC OS 8, Android.

Package Contents:

• USB to RS422/RS485 serial adapter
• 3' USB cable
• CD-ROM disc with drivers
• User's Manual

Free Shipping within the 48 continental USA states! (Online orders only)


Order yours now for immediate shipping. We accept Visa, Mastercard, American Express, Discover and PayPal though our secure server.

We stand behind our product If you need any assistance, you can call us toll-free for the life of the product for free assistance at 1-800-274-7897 (USA & Canada only), or +1-865-988-7906 for those in other areas.

Product comes with a 1 year warranty, and a 30-day money back guarantee with no restocking fee.

Introduction:

This USB Industrial I/O Adapter is designed to make industrial communication port expansion quick and simple. Connecting to a USB port on your computer or USB hub, this USB Industrial I/O Adapter instantly adds and industrial multi-electrical interface serial communication port to your system By taking advantage of the USB bus, this USB Serial Adapter makes it easier than ever to add 8 serial ports and serial devices to your system with easy plug-and-play and hot plug features.

Plugging the USB Industrial I/O Adapter into the USB port, the adapter is automatically detected and installed. There is no IRQ & COM port conflicts, since the port doesn't require any additional IRQ, DMA or memory on the system. The RS-232, or RS-422/485, port functions as a native Windows COM port, and it is compatible with Windows serial communication applications. Each port is individually configurable on the outside of the USB-8COMi-RM box.

This USB to Industrial I/O Adapter provides instant connectivity to RS-232/422/485 communication devices for factory automation, multi-drop data collection devices, barcode readers, time clocks, scales, data entry terminals, PC to PC long distance communications, ATMs and serial communications in harsh enviornments. This USB to Serial Adapter is suitable for remote access, retail and industrial applications, data collection and other applications requiring high speed RS-232 or RS-422/485 communication ports.

Specifications & Features:

• Adds 8 high speed RS-232/422/485 serial port via USB connection
• 384 byte receive buffer.
• 128 byte transmit buffer for high speed data throughput.
• Requires no IRQ, DMA or I/O port.
• Data rate speed range: 300 bps to 921,600 bps
• Serial Connector: DB-9 male connector
• Auto transmit buffer control for 2-wire RS-485 half-duplex operation.
• Termination resistors installed on-board.
• RS-232 data signals: DCD, RxD, TxD, DTR, GND, DSR, RTS, CTS, RI.
• RS-422 data signals: Tx-, Tx+, Rx+, Rx-, GND, RTS-, RTS+, CTS+, CTS-.
• RS-485 data signals: Rx-, Tx+, Rx+, Rx- (r wire), and data-, data+ (2 wire).
• Each port is independently configurable to be set to RS232, RS422 or RS485 via dip switches on the back of the unit, so you can have different ports using different protocols.
• LEDs which show transmitting and receiving of data.
• 120V, 60 Hz power adapter.
• Optionally rack-mountable and DIN-Rail mountable with included hardware.
• Metal Housing
• Operating Temperature: 0 to 55 °C (32 to 131 °F)
• Operating Humidity: 5 to 95% RH
• Storage Temperature: -20 to 75 °C (-4 to 167 °F)
• Dimensions are 257×147×44 mm³ (W×L×H) or 277×147×44 mm³ with DB9 connector and ears.
• Virtual COM port drivers provided for Windows 10, 8, 7, Vista, XP, ME, 98, Server 2012, Server 2008, Server 2003, CE.NET (version 4.2 and greater), or RT in 32-bit or 64-bit installations. Also supports Linux, MAC OS X, MAC OS 9, MAC OS 8, Android.

Free Shipping within the 48 continental USA states! (Online orders only)


Order yours now for immediate shipping. We accept Visa, Mastercard, American Express, Discover and PayPal though our secure server.

We stand behind our product If you need any assistance, you can call us toll-free for the life of the product for free assistance at 1-800-274-7897 (USA & Canada only), or +1-865-988-7906 for those in other areas.

Product comes with a 1 year warranty, and a 30-day money back guarantee with no restocking fee.

This USB Serial Adapter is designed to make industrial communication port expansion quick and simple. Connecting to a USB port on your computer or USB hub, this USB Serial Adapter instantly adds a serial communication port to your system with easy plug-and-play and hot-plug features.

Plugging the USB Serial Adapter into the USB port, the adapter is automatically detected and installed. There is no IRQ & COM port conflicts, since the port doesn't require any additional IRQ, DMA or memory on the system. The RS-232 serial port functions as a native Windows COM port, and it is compatible with Windows serial communication applications.

This USB Serial Adapter provides instant connectivity to RS-232 communication devices for factory automation, multi-drop data collection devices, barcode readers, time clocks, scales, data entry terminals, ATMs and serial communications in harsh enviornments. This USB Serial Adapter is suitable for remote access, retail and industrial application, data collection and other applications requiring a high speed RS-232 communication port.

Optical Isolation & Surge Protection

Optical isolation and surge protection are supported by the USB-COM-SI-M.

The RS-232 port is optically isolated with 2000 volt DC optical isolation. The optical isolation protects your PC or notebook from spikes and surges on the RS-232 network by converting the elctrical pulse into an optical signal and then changing it back to an electical pulse. Your computer is well protected, since the surges and spikes cannot cross the optical link.

The RS-232 port is protected by a surge protector to withstand electrostatic discharges and power surges up to 25KV ESD. Surge suppression on all signals prevents damage caused by lightning or high voltages.

Specifications & Features:

• Adds a high speed RS-232 serial port via USB connection
• 384 byte receive buffer.
• 128 byte transmit buffer for high speed data throughput.
• The RS-232 port is optically isolated with 2000 Volt DC optical isolation.
• The RS-232 port is protected by surge protection to withstand electrostatic discharge and power surges up to 25KV ESD.
• Requires no IRQ, DMA or I/O port.
• Data rate speed range: 300 bps to 921,600 bps
• Serial Connector: DB-9 male connector
• RS-232 data signals: DCD, RxD, TxD, DTR, GND, DSR, RTS, CTS, RI.
• LEDs which show transmitting and receiving of data.
• Easily mountable.
• Metal housing.
• Dimensions of 57×72×22 mm³ (W×L×H) or 82×77×22 mm³ with DB9 connector and ears.
• Virtual COM port drivers provided for Windows 10, 8, 7, Vista, XP, ME, 98, Server 2012, Server 2008, Server 2003, CE.NET (version 4.2 and greater), or RT in 32-bit or 64-bit installations. Also supports Linux, MAC OS X, MAC OS 9, MAC OS 8, Android.

Package Contents:

• USB to serial adapter
• 3' USB cable
• CD-ROM disc with drivers
• User's Manual

Free Shipping within the 48 continental USA states! (Online orders only)

Order yours now for immediate shipping. We accept Visa, Mastercard, American Express, Discover and PayPal though our secure server.

We stand behind our product If you need any assistance, you can call us toll-free for the life of the product for free assistance at 1-800-274-7897 (USA & Canada only), or +1-865-988-7906 for those in other areas.

Product comes with a 1 year warranty, and a 30-day money back guarantee with no restocking fee.

Introduction:

The USB Industrial I/O Adapter is designed to make industrial communication port expeansion quick and simple. Connecting to a USB port on your computer or USB hub, this USB Industrial I.O Adapter instantly adds and industrial multi-electrical interface serial communication port to your system with easy plug-and-play and hot-plug features.

Plugging the USB Industrial I/O Adapter into the USB port, the adapter is automatically detected and installed. There is no IRQ & COM port conflicts, since the port doesn't require any additional IRQ, DMA or memory on the system. The RS-232, or RS-422/485, port functions as a native Windows COM port, and it is compatible with Windows serial communication applications. Each port is individually configurable.

This USB to Industrial I/O Adapter provides instant connectivity to RS-232/422/485 communication devices for factory automation, multi-drop data collection devices, barcode readers, time clocks, scales, data entry terminals, PC to PC long distance communications, ATMs and serial communications in harsh enviornments. This USB to Industrial I/O Adapter provides an industrial solution for applications requiring a single node or multi-drop communications over short and long distances.

Specifications & Features:

• Adds a high speed RS-232/422/485 serial port via USB connection
• 384 byte receive buffer.
• 128 byte transmit buffer for high speed data throughput.
• Requires no IRQ, DMA or I/O port.
• Data rate speed range: 300 bps to 921,600 bps
• Serial Connector: one DB-9 male connector, and one 6-pin Terminal Block
• Supports RS-232, RS-422 Full Duplex, RS-485 Half Duplex and RS-485 Full Duplex modes.
• Auto transmit buffer control for 2-wire RS-485 half-duplex operation.
• Termination resistors installed on-board.
• RS-232 data signals: DCD, RxD, TxD, DTR, GND, DSR, RTS, CTS, RI.
• RS-422 data signals: Tx-, Tx+, Rx+, Rx-, GND, RTS-, RTS+, CTS+, CTS-.
• RS-485 data signals: Rx-, Tx+, Rx+, Rx- (r wire), and data-, data+ (2 wire).
• LEDs which show transmitting and receiving of data.
• Supports power output of 5V, 150mA, through Pin-5 of terminal block, for external devices requiring power.
• External 4-pin dip switch to set RS-232, RS-422 & RS-485 modes.
• Dimensions of 57×72×22 mm³ (W×L×H) or 82×77×22 mm³ with DB9 connector and ears.
• Virtual COM port drivers provided for Windows 10, 8, 7, Vista, XP, ME, 98, Server 2012, Server 2008, Server 2003, CE.NET (version 4.2 and greater), or RT in 32-bit or 64-bit installations. Also supports Linux, MAC OS X, MAC OS 9, MAC OS 8, Android.

Signal Pinout information:

RS-232 Signal Pin-outs of the DB-9 Male connector:
Pin 1: DCD, Pin 2: RxD, Pin 3: Txd, Pin 4: DTR, Pin 5: GND, Pin 6: DSR, Pin 7: RTS, Pin 8: CTS, Pin 9: RI

RS-232 Signal Pin-outs of the Terminal Block:
Pin 1: DCD, Pin 2: RxD, Pin 3: TxD, Pin 4: DTR, Pin 5: +5V, Pin 6: GND

RS-422 Signal Pin-outs of the DB-9 Male connector:
Pin 1: Tx-(A), Pin 2: Tx+(B), Pin 3: Rx+(B), Pin 4: Rx-(A), Pin 5: GND, Pin 6: RTS-(A), Pin 7: RTS+(B), Pin 8: CTS+(B), Pin 9: CTS-(A)

RS-422 Signal Pin-outs for the Terminal Block:
Pin 1: Tx-(A), Pin 2: Tx+(B), Pin 3: Rx+(B), Pin 4: Rx-(A), Pin 5: +5V, Pin 6: GND

RS-485 4-Wire (Full duplex) Signal Pin-outs of the DB-9 Male connector:
Pin 1: Tx-(A), Pin 2: Tx+(B), Pin 3: Rx+(B), Pin 4: RX-(A), Pin 5: GND

RS-485 2-Wire (Full duplex) Signal Pin-outs of the Terminal Block:
Pin 1: Tx-(A), Pin 2: Tx+(B), Pin 3:Rx+(B), Pin 4:Rx-(A), Pin 5: +5V, Pin 6: GND

RS-485 2-Wire (Half Duplex) Signal Pin-outs of DB-9 Male connector:
Pin 1: Data-(A), Pin 2: Data+(B), Pin 5: GND

RS-485 2-Wire (Half Duplex) Signal Pin-outs of the Terminal Block:
Pin 1: Data-(A), Pin 2: Data+(B), Pin 5: +5V, Pin 6: GND

Package Contents:

• USB to RS232/RS422/RS485 serial adapter
• 3' USB cable
• CD-ROM disc with drivers
• User's Manual

Free Shipping within the 48 continental USA states! (Online orders only)


Order yours now for immediate shipping. We accept Visa, Mastercard, American Express, Discover and PayPal though our secure server.

We stand behind our product If you need any assistance, you can call us toll-free for the life of the product for free assistance at 1-800-274-7897 (USA & Canada only), or +1-865-988-7906 for those in other areas.

Product comes with a 1 year warranty, and a 30-day money back guarantee with no restocking fee.

This USB Industrial I/O Adapter is designed to make industrial communication port expeansion quick and simple. Connecting to a USB port on your computer or USB hub, this USB Industrial I/O Adapter instantly adds and industrial multi-electrical interface serial communication port to your system. By taking advantage of the USB bus, this USB Serial Adapter makes it easier than ever to add 4 RS422/485 serial ports and serial devices to your system with easy plug-and-play and hot plug features.

Plugging the USB Industrial I/O Adapter into the USB port, the adapter is automatically detected and installed. There is no IRQ & COM port conflicts, since the port doesn't require any additional IRQ, DMA or memory on the system. The RS-422/485 port functions as a native Windows COM port, and it is compatible with Windows serial communication applications. Each port is individually configurable via DIP switches on the outside of the USB-4COMi-SI box.

This USB to Industrial I/O Adapter provides instant connectivity to RS422/485 communication devices for factory automation, multi-drop data collection devices, barcode readers, time clocks, scales, data entry terminals, PC to PC long distance communications, ATMs and serial communications in harsh enviornments. This USB to Serial Adapter is suitable for remote access, retail and industrial applications, data collection and other applications requiring high speed RS-422/485 communication ports.

Specifications & Features:

• Adds 4 high speed RS422/485 serial port via USB connection
• 384 byte receive buffer.
• 128 byte transmit buffer for high speed data throughput.
• Requires no IRQ, DMA or I/O port.
• Data rate speed range: 300 bps to 921,600 bps
• Serial Connector: DB-9 male connector
• Supports RS-422 Full Duplex, RS-485 Half Duplex and RS-485 Full Duplex modes.
• Auto transmit buffer control for 2-wire RS-485 half-duplex operation.
• RS-422 data signals: Tx-, Tx+, Rx+, Rx-, GND, RTS-, RTS+, CTS+, CTS-.
• RS-485 data signals: Rx-, Tx+, Rx+, Rx- (r wire), and data-, data+ (2 wire).
• LEDs which show transmitting and receiving of data.
• Easily mountable
• Metal Housing
• Dimensions of 167× 99×29 mm³ (W×L×H) or 189×102×30 mm³ with DB9 connectors and ears.
• Virtual COM port drivers provided for Windows 10, 8, 7, Vista, XP, ME, 98, Server 2012, Server 2008, Server 2003, CE.NET (version 4.2 and greater), or RT in 32-bit or 64-bit installations. Also supports Linux, MAC OS X, MAC OS 9, MAC OS 8, Android.

This adapter supplies Optical Isolation & Surge Protection.

Each RS-422/485 port is individually optically isolated with 2000 volt DC optical isolation. The optical protects your PC or notebook from spikes and surges on the RS-422/485 network, by converting the electrical pulse into an optical signal and then changing it back into an electrical pulse. Your computer is well protected, since the surges and spikes cannot cross the optical link. Each RS-422/485 port is individually protected by surge protector to withstand electrostatic discharge and power surges up to 25KV ESD. Surge suppression on all signals prevent damages caused by lighning and high voltage.

Free Shipping within the 48 continental USA states! (Online orders only)


Order yours now for immediate shipping. We accept Visa, Mastercard, American Express, Discover and PayPal though our secure server.

We stand behind our product If you need any assistance, you can call us toll-free for the life of the product for free assistance at 1-800-274-7897 (USA & Canada only), or +1-865-988-7906 for those in other areas.

Product comes with a 1 year warranty, and a 30-day money back guarantee with no restocking fee.

Introduction:

This USB 2-port Serial Adapter is designed to make serial port expansion quick and simple. Connecting to a USB port on your computer or USB hub, this USB 2-port Serial Adapter instantly adds 2 serial communication ports to your system with easy plug-and-play and hot-plug features. (Only one of the serial ports is visible in the photo, but there is a 9-pin serial port on each side of the adapter.)

Plugging the USB Serial Adapter into the USB port, the adapter is automatically detected and installed. There is no IRQ & COM port conflicts, since the ports don't require any additional IRQ, DMA or memory on the system. The RS-232 serial ports function as native Windows COM ports, and are compatible with Windows serial communication applications. Each port is individually configurable.

This USB 2-port Serial Adapter provides instant connectivity to any two RS-232 communication device.

Specifications & Features:

• Adds 2 high speed RS-232 serial port via a USB 1.1 or 2.0 connection
• 384 byte receive buffer per serial port.
• 128 byte transmit buffer per serial port for high speed data throughput.
• Requires no IRQ, DMA or I/O port.
• Data rate speed range: 300 bps to 921,600 bps per serial port
• Serial Connector: DB-9 male connector
• RS-232 data signals: DCD, RxD, TxD, DTR, GND, DSR, RTS, CTS, RI.
• Provides transmit & receive lights.
• Uses an FTDI brand chipset.
• Virtual COM port drivers provided for Windows 10, 8, 7, Vista, XP, ME, 98, Server 2012, Server 2008, Server 2003, CE.NET (version 4.2 and greater), or RT in 32-bit or 64-bit installations. Also supports Linux, MAC OS X, MAC OS 9, MAC OS 8, Android.

• USB to 2-port RS232 serial adapter
• 3' USB cable
• CD-ROM disc with drivers
• User's Manual

Free Shipping within the 48 continental USA states! (Online orders only)

Order yours now for immediate shipping. We accept Visa, Mastercard, American Express, Discover and PayPal though our secure server.

We stand behind our product If you need any assistance, you can call us toll-free for the life of the product for free assistance at 1-800-274-7897 (USA & Canada only), or +1-865-988-7906 for those in other areas.

Product comes with a 1 year warranty, and a 30-day money back guarantee with no restocking fee.

The controller co-exists with your current onboard IDE ports, and enables you to add the new Serial ATA devices to your system. By simply installing the SATA-200 to a PCI slot and loading the included driver, any system with a PCI slot may upgrade to the Serial ATA interface with superior performance.

The Serial ATA-150 Controller auto-identifies and configured Serial ATA disk drives. The controller supports disk drives larger than (and smaller than) 137GB. The card is bundled with one Serial ATA cable, and complete drivers of Windows XP, 2000, ME, NT 4.0, & 98 are included.

FEATURES & SPECIFICATIONS

Features:

• Industrial Design: An integrated cable with one USB Type A connector for upstream connection to USB host of PC/NB and three ports for conventional PC peripherals, i.e., PS/2, serial, and parallel printer port.
• One PS/2 port for either mouse or keyboard.
• One serial port with DB-9 Pin male connector
• One parallel printer port with DB-25 Pin female connector (port can only be used with a printer and not other types of parallel applications.)

(a). USB Printer Class Specification 1.0 compliant
(b). IEEE-1284 1994 (bi-directional parallel interface) specification compliant

System Requirements:

Windows ME/Window 98SE/Windows 2000/Windows XP/Windows Vista

Package Contents:

• USB 1.1 Mini Docking Station
• Software CD Driver
• User's Manual

Description:

Allows multiple PCs to share up to 4 USB devices.

Introduction:

This USB manual share switch is a multi-function product, which enables 2 computers to share multiple devices (up to 4, or more if USB HUBs are attached). Quickly switch right among computers by pressing the switch button on the device. The installation is easy with plug and play convenience.

Features:

• Compliant with Universal Serial Bus Specification Revision 2.0 (Data Rate 1.5/12/480 Mbps)
• Supports bus-power and self-power modes
• Two USB2.0 channel switches: Two USB 2.0 type-B connecters, Four USB2.0 type-A connecters
• One power LED indicator for bus-power and self-power
• Two power LED indicators for upstream port status
• Four LED indicators for downstream port status
• Plug and play with the USB devices
• Over-current detection and protection
• Connects up to 127 USB Devices
• Uses the button to have master of devices
• Compatible with Windows 98SE, ME, 2000, XP, 2003, Vista & MAC.

Quality USB to 16-port RS232 serial adapter with the FTDI chipset for best compatibility.

Introduction:

This USB Serial Adapter is designed to make serial port expansion quick and simple. Connecting to a USB port on your computer or USB hub, this USB Serial Adapter instantly adds serial communication ports to your system. By taking advantage of the USB bus, this USB Serial Adapter makes it easier than ever to add 16 serial ports and serial devices to your system with easy plug-and-play and hot plug features.

Plugging the USB Serial Adapter into the USB port, the adapter is automatically detected and installed. There is no IRQ & COM port conflicts, since the port doesn't require any additional IRQ, DMA or memory on the system. The RS-232 ports function as native Windows COM ports, and it is compatible with Windows serial communication applications. Each port is individually configurable.

This USB Serial Adapter provides instant connectivity to RS-232 communication devices for factory automation, multi-drop data collection devices, barcode readers, time clocks, scales, data entry terminals, ATMs and serial communications in harsh enviornments. This USB to Serial Adapter is suitable for remote access, retail and industrial applications, data collection and other applications requiring high speed RS-232 communication ports.

Specifications & Features:

• Adds 16 high speed RS-232 serial port via USB connection
• 384 byte receive buffer.
• 128 byte transmit buffer for high speed data throughput.
• Requires no IRQ, DMA or I/O port.
• Data rate speed range: 300 bps to 921,600 bps
• Serial Connector: DB-9 male connector
• RS-232 data signals: DCD, RxD, TxD, DTR, GND, DSR, RTS, CTS, RI.
• Input: AC 100V - 240V, 47 - 63 Hz.
• Ouput: DC 5.0V 4A.
• Optionally rack-mountable and DIN-Rail mountable with included hardware.
• Metal Housing
• Dimensions are 429×147×44 mm³ (W×L×H) or 451×152×44 mm³ with DB9 connector and ears.
• Virtual COM port drivers provided for Windows 10, 8, 7, Vista, XP, ME, 98, Server 2012, Server 2008, Server 2003, CE.NET (version 4.2 and greater), or RT in 32-bit or 64-bit installations. Also supports Linux, MAC OS X, MAC OS 9, MAC OS 8, Android.

Free Shipping within the 48 continental USA states! (Online orders only)


Order yours now for immediate shipping. We accept Visa, Mastercard, American Express, Discover and PayPal though our secure server.

We stand behind our product If you need any assistance, you can call us toll-free for the life of the product for free assistance at 1-800-274-7897 (USA & Canada only), or +1-865-988-7906 for those in other areas.

Product comes with a 1 year warranty, and a 30-day money back guarantee with no restocking fee.

This USB Industrial I/O Adapter is designed to make industrial communication port expeansion quick and simple. Connecting to a USB port on your computer or USB hub, this USB Industrial I/O Adapter instantly adds and industrial multi-electrical interface serial communication port to your system By taking advantage of the USB bus, this USB Serial Adapter makes it easier than ever to add 8 serial ports and serial devices to your system with easy plug-and-play and hot plug features.

Plugging the USB Industrial I/O Adapter into the USB port, the adapter is automatically detected and installed. There is no IRQ & COM port conflicts, since the port doesn't require any additional IRQ, DMA or memory on the system. The RS-232, or RS-422/485, port functions as a native Windows COM port, and it is compatible with Windows serial communication applications. Each port is individually configurable on the outside of the USB-8COMi-RM box.

This USB to Industrial I/O Adapter provides instant connectivity to RS-232/422/485 communication devices for factory automation, multi-drop data collection devices, barcode readers, time clocks, scales, data entry terminals, PC to PC long distance communications, ATMs and serial communications in harsh enviornments. This USB to Serial Adapter is suitable for remote access, retail and industrial applications, data collection and other applications requiring high speed RS-232 or RS-422/485 communication ports.

Specifications & Features:

• Adds 8 high speed RS-232/422/485 serial port via USB connection
• 384 byte receive buffer.
• 128 byte transmit buffer for high speed data throughput.
• Requires no IRQ, DMA or I/O port.
• Data rate speed range: 300 bps to 921,600 bps
• Serial Connector: DB-9 male connector
• Auto transmit buffer control for 2-wire RS-485 half-duplex operation.
• Termination resistors installed on-board.
• RS-232 data signals: DCD, RxD, TxD, DTR, GND, DSR, RTS, CTS, RI.
• RS-422 data signals: Tx-, Tx+, Rx+, Rx-, GND, RTS-, RTS+, CTS+, CTS-.
• RS-485 data signals: Rx-, Tx+, Rx+, Rx- (r wire), and data-, data+ (2 wire).
• Each port is independently configurable to be set to RS232, RS422 or RS485 via dip switches on the back of the unit, so you can have different ports using different protocols.
• LEDs which show transmitting and receiving of data.
• AC 230V, 50 hz power supply.
• Optionally rack-mountable and DIN-Rail mountable with included hardware.
• Metal Housing
• Dimensions are 257×147×44 mm³ (W×L×H) or 277×147×44 mm³ with DB9 connector and ears.
• Virtual COM port drivers provided for Windows 10, 8, 7, Vista, XP, ME, 98, Server 2012, Server 2008, Server 2003, CE.NET (version 4.2 and greater), or RT in 32-bit or 64-bit installations. Also supports Linux, MAC OS X, MAC OS 9, MAC OS 8, Android.

Free Shipping within the 48 continental USA states! (Online orders only)


Order yours now for immediate shipping. We accept Visa, Mastercard, American Express, Discover and PayPal though our secure server.

We stand behind our product If you need any assistance, you can call us toll-free for the life of the product for free assistance at 1-800-274-7897 (USA & Canada only), or +1-865-988-7906 for those in other areas.

Product comes with a 1 year warranty, and a 30-day money back guarantee with no restocking fee.

ECP/bi-directional Single Parallel Port. Provides a reliable solution for Notebook computers to connect a parallel peripheral such as a printer, scanner, dongle, etc.

This quality PCMCIA parallel card adds one DB25 female parallel port to Notebook Computers.

Introduction:

The CBLPT is a 32-bit CardBus based parallel expansion add-in adapter to provide a fast connectivity solution for today's Notebook PC systems. It provides one ultra-high performance bi-directional parallel port for most of the parallel devices. The CBLPT equips your notebook with an IEEE-1284 compliant ECP parallel port that fully supports the existing Centronics interface. With its complete hardware and strong OS support, the CBLPT is an ideal upgrade to support all Parallel-compatible devices for the rapidly changing mobile computer to preserve user's investment in Parallel interface.

Features:

• Supports PC Card 32-bit CardBus Type-II Slot
• One IEEE 1284 ECP Parallel Port
• 32-bit CardBus PIO Mode with 133MB/S Bandwidth
• CardBus IRQ Sharing Feature Eliminates IRQ Conflicts
• Provides one DB25-Female External Connector
• Works with major types of Parallel I/O peripherals
• Supports Windows Vista, XP, 2000, 2003 and Linux
  (Note: Windows Vista drivers are not on the included CD-ROM disc, but can be downloaded here: cblptvista.zip.)

Specifications:

• System For 32-bit CardBus Systems, up to 133MB/S Bandwidth
• PCI Interface Fully PC Card 32-bit CardBus Type-II Slot compatible
• Parallel Port One DB25-Female IEEE1284 Compliant ECP parallel Port, the key features as follows:
• Supports most of the parallel devices including printer, scanner, and others
• I/O Hardware
• One DB25-Female Parallel Connector
• One 68-pin PCMCIA Connector for Notebooks
• OS Support for Windows 2000, XP, 2003 & Linux

Environmental Specifications

• Operating Temperature: 0 to 55°C (32 to 131°F), 10% to 90% relative humidity (non-condensing) Storage Temperature: -40 to 75°C (-40 to 167°F), 5% to 95% relative humidity (non-condensing) Form Factor 3.37 x 2.12 (8.57cm x 5.40cm) Installs as a fully featured I/O mapped parallel port as LPT1, LPT2 or LPT3 (Unlike some competitors' parallel port cards which only emulates the parallel port). Fully compatible with IEEE-1284 Parallel Port Standard and with 2.1 (level 5 - highest level of compatibility) PCMCIA Standard, designed with extremely low standby power draw to save battery life.

Sometimes dongles work with PCMCIA Parallel Cards, and sometimes they don't. We can't say for sure if your dongle will work on your system with this card or not before you try it. We have found that many times the driver for the dongle needs to be updated to work properly. If this adapter won't work for your dongle, you can return it under our unconditional 30-day money back guarantee with no restocking fee, so the only thing you will be out is shipping costs.

Important information regarding applications that require standard I/O ranges:

Please note that this adapter is a plug & play adapter. It will map in at the I/O range where the computers BIOS assigns it. This adapter won't work with applications that require the parallel port to be at the original I/O ranges of 378, 278 and 3BC. It works fine with applications that use the standard Windows calls to open the parallel port.

Please note: This is a PCMCIA Cardbus card, not an ExpressCard. Some notebook computers take ExpressCards. If you aren't sure which one you need, please verify if your system has a PCMCIA Cardbus slot or an ExpressCard slot before placing your order. If you do need an ExpressCard instead, please go to Serial & Parallel ExpressCards to order one.

Free Shipping within the 48 continental USA states! (Online orders only)

Order yours now for immediate shipping. We accept Visa, Mastercard, American Express, Discover and PayPal though our secure server.

We stand behind our product If you need any assistance, you can call us toll-free for the life of the product for free assistance at 1-800-274-7897 (USA & Canada only), or +1-865-988-7906 for those in other areas.

Product comes with a 1 year warranty, and a 30-day money back guarantee with no restocking fee.

USB TO IDE CABLE FOR 2.5"/3.5"/5.25" DRIVE WITH POWER ADAPTER The USB to IDE / SATA Drive Adapter implements a bridge between one USB port and one ATA or ATAPI based mass storage device port. The USB to IDE / SATA Drive Adapter turns any IDE or SATA drive into a convenient external drive. Easily transfer files from computer or notebook, back up files, or store large file archives on hard drives. The Hi-Speed USB interface provides for easy installation with its Plug and Play design. The adapter supports all existing IDE/ATAPI devices such as CD-ROM, CD-RW, DVD-ROM, IDE hard drives and SATA hard drives. This adapter is unique in that one cable has a standard 40-pin IDE connector on one side and a connector on one side for 3.5" and 5.25" drives, and has a 44-pin connector on the other side for 2.5" laptop/notebook drives. It also has a SATA connector for connecting SATA hard drives. Your drive will map in as the next available drive letter on your system automatically and can be accessed like like any other drive on your system. One-Touch Backup The K-100 offers a one-touch backup solution. Simply load the included software onto your computer, select what files you'd like backed up in the included software, and you're ready to go. Just press the button and the K-100 will automatically back up your selected files. Now you can easily back up your important files at the touch of a button! NOTE: Some hard drives (especially the Hitachi hard drives) have a female IDE connector on them instead of a male IDE connector. This adapter is only compatible with hard drives which use a male IDE connector.

Compatible with 2.5", 3.5", 5.25" and SATA devices Supports IDE & Enhanced IDE 3.5" internal IDE Hard Disk Supports ATA/ATAPI-6 Specification 1.0 Supports SATA I and SATA II USB 2.0 up to 480Mbps Transfer Speed Backward Compatible with USB 1.1 Plug and Play Hot Swappable

USB to IDE / SATA Cable Connect any device with an IDE or SATA Interface to a PC with USB interface Transfer rate Approx. 480 MBps Complies with USB 2.0 standards Backwards compatible to USB 1.1 standards Complies with ATA/ATAPI-66 Spe. V1.0 Compatible with SATA-I and SATA-II Supports IDE and enhanced IDE hard drives Supports ATA/ATAPI CD-ROM/R/RW DVD-ROM and more External AC adapter drive power.

Microsoft Windows 98/98SE/ME/2000/2003/XP/Vista/7 & MAC OS 8.6 and later

USB to IDE / SATA adapter cable Power adapter (120V, 60 Hz) and cord.. provides power for standard IDE & SATA drives. SATA data cable Instruction Booklet Driver CD

Product comes with a 1 year warranty, and a 30-day money back guarantee with no restocking fee.

Description:

The USB parallel adapter cable is constructed to meet all the USB to IEEE 1284 specification requirements. This product is essentially a flexiable cable that utilizes hardware and software to provide intelligent and transparent protocol conversion between Universal Serial Bus (USB) on the PC side and IEEE 1284 parallel on the printer side. It will allow any Windows or MAC PC with a USB port to print to nearly any parallel printer.

NOTE: USB to Parallel Cables will only work with printers, and not other types of parallel devices, as they map in as "USB Printing Support", not as a true parallel port. If you need a true parallel port, please look at our PCMCIA Parallel Cards, our Parallel Expresscards or our PCI-bus Parallel cards (some notebook computers use PCMCIA cards, and some use ExpressCards. Most desktop computers use PCI-bus cards.)

Features:

Settable to COM1-COM99.

Supports fast data transfer rates (up to 921,600 bps).

Provides 8 DB9 (9-pin male) serial connectors via an included octopus cable that plugs on to the back of the card.

Uses only 1 IRQ and can share an interrupt with other plug & play devices in your system.

Designed for use with Windows 95, 98, ME, 2000, XP, Vista, 7, 8, 10, NT 4.0, DOS, Linux kernel 2.0.xx and later & OS/2.

Free Shipping within the 48 continental USA states! (Online orders only)

Order yours now for immediate shipping. We accept Visa, Mastercard, American Express, Discover and PayPal though our secure server.

We stand behind our product If you need any assistance, you can call us toll-free for the life of the product for free assistance at 1-800-274-7897 (USA & Canada only), or +1-865-988-7906 for those in other areas.

Product comes with a 1 year warranty, and a 30-day money back guarantee with no restocking fee.

Compatible Media Types:

• SMC & xD Slot: SM Card, xD Card


• CF Slot: CF Card, CFII Card, CF Ultra II, Micro Drive
• SD & MMC Slot: SD Card, Mini-SD Card, SD Ultra, MMC Card, MMCII Card, RS-MMC Card, HS-MMC Card, SDC Card, T-Flsh Card.
• MS Slot: MS Card, MS Pro Card, MS MG Card, MS MG Pro Card, MS Duo Card, MS MG Duo Card, MS Pro Duo Card, MS MG Pro Duo Card.

System Requirements:

PC:
1. IBM PC 486DX4-100MHz or higher or compatible system.
2. Windows 98/ME/2000/XP/2003/Vista or Linux 2.2.7 or above.
3. Available USB port. (For best performance, a USB 2.0 port is required, but the adapter will operate at slower speeds on a USB 1.1 port as well.)

MAC:
1. Power G3, G4 or i-Mac
2. Mac OS 9 (Recommended 9.2.2) or Mac OS X (Recommended 10.2.3)
3. Available USB port.

Package Contents:

• USB 2.0 23-in-1 Reader/Writer
• CD-ROM disc with Windows 98 software for accessing the media (doesn't need to be loaded for Windows ME, 2000, XP or 2003).
• USB 2.0 cable (2 1/2 feet long)
• User's Manual

Description:

The USB parallel adapter cable is constructed to meet all the USB to IEEE 1284 specification requirements. This product is essentially a flexiable cable that utilizes hardware and software to provide intelligent and transparent protocol conversion between Universal Serial Bus (USB) on the PC side and IEEE 1284 parallel on the printer side. It will allow any Windows computer with a USB port to print to nearly any parallel printer. (Please note that the printer needs to have a standard IEEE 1284 connector (also known as a 1284B connector). It will not work with 1284C connectors (the subminiature sized ones). Most printers have the 1284B connectors. Also, it will not work with non-printer type parallel devices.)

If you aren't sure if your printer has a standard IEEE 1284 connector (1284B), here is some information to help you determine it. Many printers that have a IEEE 1284B connector are listed below. If your printer isn't listed, please verify that it has a 1284B connector type before ordering. To help you determine if you have a 1284B or 1284C connector, the length of the 1284B connector is 1 7/8 inches long. Here is the list of printers which we know have the 1284B connection and are compatible with this adapter:

HP DeskJet Models - 420, 500C, 520C, 670C, 692C, 695C, 710C, 750, 850C, 870C, 890C, 895, 1100C, 1120C

HP LaserJet Models - III P, 4, 4 PLUS, 4P, 4L, 4V, 5, 5P, 5L, 5M, 6P, 6L, 2000c, 2100M, 4000, 5000 (Please note: It has been reported that some of the 4L printers have a 1284B connector and some have a 1284C connector. If you have a 4L, please ensure that the connector on your printer measures 1 7/8" across before placing your order.)

Cannon BJC Models - BJC-30, BJC-70, BJC-80, BJC-200, BJC-200eX, BJC-210, BJC-210SP, BJC-230, BJC-240, BJC-250, BJC-255sp, BJC-4000, BJC-4100, BJC-4200sp, BJC-4300, BJC-4650, BJC-6000, BJC-7000

Epson Models - Stylus Color 300, Stylus Color 400, Stylus Color 440, Stylus Color 600, Stylus Color 740, Stylus Color 800, Stylus Color 850, Stylus Photo 700, Stylus Photo EX, PM-700C, PM-750C, PM-2000C, EPL-N1600

Lexmark Models - XJ-350, 1100... Not compatible with the Lexmark Z11.

Panasonic Model - KX-1121

NOTE: USB to Parallel Cables will only work with printers, and not other types of parallel devices, as they map in as "USB Printing Support", not as a true parallel port. If you need a true parallel port, please look at our PCMCIA Parallel Cards, our Parallel Expresscards or our PCI-bus Parallel cards (some notebook computers use PCMCIA cards, and some use ExpressCards. Most desktop computers use PCI-bus cards.)

Features:

Introduction:

This USB Serial Adapter is designed to make industrial communication port expansion quick and simple. Connecting to a USB port on your computer or USB hub, this USB Serial Adapter instantly adds two serial communication ports to your system with easy plug-and-play and hot-plug features.

Plugging the USB Serial Adapter into the USB port, the adapter is automatically detected and installed. There is no IRQ & COM port conflicts, since the port doesn't require any additional IRQ, DMA or memory on the system. The RS-232 serial ports function as a native Windows COM ports, and it is compatible with Windows serial communication applications.

This USB Dual Port Serial Adapter provides instant connectivity to RS-232 communication devices for factory automation, multi-drop data collection devices, barcode readers, time clocks, scales, data entry terminals, ATMs and serial communications in harsh enviornments. This USB Serial Adapter is suitable for remote access, retail and industrial application, data collection and other applications requiring a high speed RS-232 communication port.

Specifications & Features:

• Adds a high speed RS-232 serial port via USB connection
• 384 byte receive buffer.
• 128 byte transmit buffer for high speed data throughput.
• Requires no IRQ, DMA or I/O port.
• Data rate speed range: 300 bps to 921,600 bps
• Serial Connectors: Two DB-9 male connectors
• RS-232 data signals: DCD, RxD, TxD, DTR, GND, DSR, RTS, CTS, RI.
• LEDs which show transmitting and receiving of data.
• Easily mountable.
• Metal housing.
• Dimensions of 57×72×22 mm³ (W×L×H) or 82×77×22 mm³ with DB9 connector and ears.
• Virtual COM port drivers provided for Windows 10, 8, 7, Vista, XP, ME, 98, Server 2012, Server 2008, Server 2003, CE.NET (version 4.2 and greater), or RT in 32-bit or 64-bit installations. Also supports Linux, MAC OS X, MAC OS 9, MAC OS 8, Android.

Package Contents:

• USB to 2-port serial adapter
• 3' USB cable
• CD-ROM disc with drivers
• User's Manual

Free Shipping within the 48 continental USA states! (Online orders only)

Order yours now for immediate shipping. We accept Visa, Mastercard, American Express, Discover and PayPal though our secure server.

We stand behind our product If you need any assistance, you can call us toll-free for the life of the product for free assistance at 1-800-274-7897 (USA & Canada only), or +1-865-988-7906 for those in other areas.

Product comes with a 1 year warranty, and a 30-day money back guarantee with no restocking fee.

This USB Industrial I/O Adapter is designed to make industrial communication port expeansion quick and simple. Connecting to a USB port on your computer or USB hub, this USB Industrial I/O Adapter instantly adds and industrial multi-electrical interface serial communication port to your system. By taking advantage of the USB bus, this USB Serial Adapter makes it easier than ever to add 4 RS422/485 serial ports and serial devices to your system with easy plug-and-play and hot plug features.

Plugging the USB Industrial I/O Adapter into the USB port, the adapter is automatically detected and installed. There is no IRQ & COM port conflicts, since the port doesn't require any additional IRQ, DMA or memory on the system. The RS-422/485 port functions as a native Windows COM port, and it is compatible with Windows serial communication applications. Each port is individually configurable via DIP switches on the outside of the USB-4COMi-SI box.

This USB to Industrial I/O Adapter provides instant connectivity to RS422/485 communication devices for factory automation, multi-drop data collection devices, barcode readers, time clocks, scales, data entry terminals, PC to PC long distance communications, ATMs and serial communications in harsh enviornments. This USB to Serial Adapter is suitable for remote access, retail and industrial applications, data collection and other applications requiring high speed RS-422/485 communication ports.

Specifications & Features:

• Adds 4 high speed RS422/485 serial port via USB connection
• 384 byte receive buffer.
• 128 byte transmit buffer for high speed data throughput.
• Requires no IRQ, DMA or I/O port.
• Data rate speed range: 300 bps to 921,600 bps
• Serial Connector: DB-9 male connector
• Supports RS-422 Full Duplex, RS-485 Half Duplex and RS-485 Full Duplex modes.
• Auto transmit buffer control for 2-wire RS-485 half-duplex operation.
• RS-422 data signals: Tx-, Tx+, Rx+, Rx-, GND, RTS-, RTS+, CTS+, CTS-.
• RS-485 data signals: Rx-, Tx+, Rx+, Rx- (r wire), and data-, data+ (2 wire).
• LEDs which show transmitting and receiving of data.
• Easily mountable
• Metal Housing
• Dimensions of 167× 99×29 mm³ (W×L×H) or 189×102×30 mm³ with DB9 connectors and ears.
• Virtual COM port drivers provided for Windows 10, 8, 7, Vista, XP, ME, 98, Server 2012, Server 2008, Server 2003, CE.NET (version 4.2 and greater), or RT in 32-bit or 64-bit installations. Also supports Linux, MAC OS X, MAC OS 9, MAC OS 8, Android.

This adapter supplies Optical Isolation & Surge Protection.

Each RS-422/485 port is individually optically isolated with 2000 volt DC optical isolation. The optical protects your PC or notebook from spikes and surges on the RS-422/485 network, by converting the electrical pulse into an optical signal and then changing it back into an electrical pulse. Your computer is well protected, since the surges and spikes cannot cross the optical link. Each RS-422/485 port is individually protected by surge protector to withstand electrostatic discharge and power surges up to 25KV ESD. Surge suppression on all signals prevent damages caused by lighning and high voltage.

Free Shipping within the 48 continental USA states! (Online orders only)

Order yours now for immediate shipping. We accept Visa, Mastercard, American Express, Discover and PayPal though our secure server.

We stand behind our product If you need any assistance, you can call us toll-free for the life of the product for free assistance at 1-800-274-7897 (USA & Canada only), or +1-865-988-7906 for those in other areas.

Product comes with a 1 year warranty, and a 30-day money back guarantee with no restocking fee.

SPP/ECP/EPP Dual Parallel Ports. Provides a reliable solution for Notebook computers to connect parallel peripherals such as printers, scanners, dongles, etc.

This quality PCMCIA parallel card adds two DB25 female parallel port to Notebook Computers.

Introduction:

The LPT-PCM is a 32-bit CardBus based parallel expansion add-in adapter to provide a fast connectivity solution for today's Notebook PC systems. It provides two ultra-high performance bi-directional parallel port for most of the parallel devices. The CBLPT2 equips your notebook with an IEEE-1284 compliant SPP, EPP and ECP parallel port that fully supports the existing Centronics interface. With its complete hardware and strong OS support, the CBLPT2 is an ideal upgrade to support all Parallel-compatible devices for the rapidly changing mobile computer to preserve user's investment in Parallel interface.

Features:

• Supports PC Card 32-bit CardBus Type-II Slot
• One IEEE 1284 SPP/ECP/EPP Parallel Port
• 32-bit CardBus PIO Mode with 133MB/S Bandwidth
• CardBus IRQ Sharing Feature Eliminates IRQ Conflicts
• Provides two DB25-Female External Connector
• Works with major types of Parallel I/O peripherals
• Supports Windows Vista, XP, 2000, 2003 and Linux
  (Note: Windows Vista drivers are not on the included CD-ROM disc, but can be downloaded here: cblptvista.zip.)

Specifications:

• System For 32-bit CardBus Systems, up to 133MB/S Bandwidth
• PCI Interface Fully PC Card 32-bit CardBus Type-II Slot compatible
• Parallel Port One DB25-Female IEEE1284 Compliant SPP/EPP/ECP parallel Port, the key features as follows:
• Supports most of the parallel devices including printer, scanner, and others Supports SPP, EPP and ECP modes
• I/O Hardware
• Two DB25-Female Parallel Connectors
• One 68-pin PCMCIA Connector for Notebooks
• OS Support for Windows 2000, XP, 2003 & Linux

Environmental Specifications

• Operating Temperature: 0 to 55°C (32 to 131°F), 10% to 90% relative humidity (non-condensing) Storage Temperature: -40 to 75°C (-40 to 167°F), 5% to 95% relative humidity (non-condensing) Form Factor 3.37 x 2.12 (8.57cm x 5.40cm) Installs as a fully featured I/O mapped parallel port as LPT1, LPT2 or LPT3 (Unlike some competitors' parallel port cards which only emulates the parallel port). Fully compatible with IEEE-1284 Parallel Port Standard and with 2.1 (level 5 - highest level of compatibility) PCMCIA Standard, designed with extremely low standby power draw to save battery life.

Sometimes dongles work with PCMCIA Parallel Cards, and sometimes they don't. We can't say for sure if your dongle will work on your system with this card or not before you try it. We have found that many times the driver for the dongle needs to be updated to work properly. If this adapter won't work for your dongle, you can return it under our unconditional 30-day money back guarantee with no restocking fee, so the only thing you will be out is shipping costs.

Important information regarding applications that require standard I/O ranges:

Please note that this adapter is a plug & play adapter. It will map in at the I/O range where the computers BIOS assigns it. This adapter won't work with applications that require the parallel port to be at the original I/O ranges of 378, 278 and 3BC. It works fine with applications that use the standard Windows calls to open the parallel port.

Please note: This is a PCMCIA Cardbus card, not an ExpressCard. Some notebook computers take ExpressCards. If you aren't sure which one you need, please verify if your system has a PCMCIA Cardbus slot or an ExpressCard slot before placing your order. If you do need an ExpressCard instead, please go to Serial & Parallel ExpressCards to order one.

Free Shipping within the 48 continental USA states! (Online orders only)

Order yours now for immediate shipping. We accept Visa, Mastercard, American Express, Discover and PayPal though our secure server.

We stand behind our product If you need any assistance, you can call us toll-free for the life of the product for free assistance at 1-800-274-7897 (USA & Canada only), or +1-865-988-7906 for those in other areas.

Product comes with a 1 year warranty, and a 30-day money back guarantee with no restocking fee.

Settable to COM1-COM99.

Provides 6 DB9 (9-pin male) serial connectors. 2 are on the back of the card and 4 are via 2 dongles.

Uses only 1 IRQ and can share an interrupt with other plug & play devices in your system.

Designed for use with Windows 95, 98, ME, 2000, XP, Vista, 7, 8, 10, NT 4.0, DOS & Linux.

NOTE: The latest drivers can be downloaded at http://www.asix.com.tw.

(Special note for using this card in a DOS environment: The IRQ which is assigned to the card by the computer through plug & play is the only IRQ you can use, so for this card to work in DOS, your DOS application must let you specify the IRQ. Some DOS software only lets you specify COM1, COM2, etc. and they assume the IRQ [IRQ4 for COM1, IRQ3 for COM2, etc.] which won't work in this case.)

Free Shipping within the 48 continental USA states! (Online orders only)

Order yours now for immediate shipping. We accept Visa, Mastercard, American Express, Discover and PayPal though our secure server.

We stand behind our product If you need any assistance, you can call us toll-free for the life of the product for free assistance at 1-800-274-7897 (USA & Canada only), or +1-865-988-7906 for those in other areas.

Product comes with a 1 year warranty, and a 30-day money back guarantee with no restocking fee.