The USB Sound Adapter is a highly flexible audio interface. By using USB Hot-swap technology it can be used either with Desktop or Notebook systems. This adapter provides a 2-channel audio output and a MIC IN port. No drivers required just plug and play for instant audio playback. (If your system already has a MIC IN port, this will just add an additional MIC IN port to the system.)

Specifications:

• USB v2.0 compliant (backward compatible to USB 1.1)
• Compliant with USB audio device
• USB bus powered 500mA operation
• Single 12MHz crystal input
• On-chip PLL and embedded USB transceiver
• Isochronous transfer using adaptive synchronization with internal PLL
• 48 KHz sampling rate for audio playback
• Embedded high performance 16 bit audio DAC
• Embedded power on reset block
• Power supplied by USB Port, 5V, 500mA

Connections:

• Interface: USB 2.0
• Connector: 1 x USB A type, 1 x Audio Out Sound Port & 1 MIC IN Port
• Data transfer rate: Up to 12 Mbps
• Power Mode: Bus power

System Requirements:

• Available USB port

Operating System: Windows 98 / Me / 2000 / XP / VISTA / 7 / 8 / MAC OS 9.0 or 10.1 or later

Package Contents:

• Approx. 1 foot USB Audio Cable
• CD with User Manual

The USB 5.1 Channel Audio Adapter that provides an amazing audio accessory for any computer with a USB port. It is quipped with standard input and output connectors to add a great stereo input and output performance. The USB 5.1 Channel Audio Adapter not only combines high quality audio recording and playback capabilities but also allows the connection of most popular audio gear such as microphones, home stereos, musical instruments, and powered speakers to your USB capable computer.

Function:

System Requirements:

• IBM compatible PC or Mac with one USB port
• With one of the following operating systems:
Windows® 98/SE Windows® ME Windows® 2000 Windows® XP Windows® 7 Windows® 8 MacTM 9.X/ 10.1**

** Under MAC OS, there is only 2-channel audio playback, and the volume buttons on the adapter are not functional.

Specifications:

• Compliant with USB specification V1.1
• Compliant with USB audio device class specification V1.0
• Compliant with USB HID class specification V1.1
• Plug-and-play operation with Microsoft OS/ Mac OS default drivers
• Full-duplex playback/recording audio stream without sound card in PC
• LED indicator for Power (always red)/Playback (flash)
• Supports suspend/resume and remote wake-up
• Supports Fixed 48KHz sampling rate in analog recording and playback
• Supports 6 channels for analog playback in the analog playback mode
• Supports one stereo and one mono analog-line level inputs by analog recording in the analog recording mode
• Transfer Rate: 1.5/12 Mbps
• Operating Temperature: 0~40 degrees (Celsius)
• Storage Temperature: 0~70 degrees (Celsius)
• Humidity: 0~80%

Package Contents:

• USB 5.1 Channel Audio Adapter.........1
• Application Software CD....................1
• Quick Installation Guide.....................1

The USB Sound Adapter is a highly flexible audio interface. By using USB Hot-swap technology it can be used either with Desktop or Notebook systems. This adapter provides a 2-channel audio output and a MIC IN port. No drivers required just plug and play for instant audio playback. (If your system already has a MIC IN port, this will just add an additional MIC IN port to the system.)

Specifications:

• USB v2.0 compliant (backward compatible to USB 1.1)
• Compliant with USB audio device
• USB bus powered 500mA operation
• Single 12MHz crystal input
• On-chip PLL and embedded USB transceiver
• Isochronous transfer using adaptive synchronization with internal PLL
• 48 KHz sampling rate for audio playback
• Embedded high performance 16 bit audio DAC
• Embedded power on reset block
• Power supplied by USB Port, 5V, 500mA

Connections:

• Interface: USB 2.0
• Connector: 1 x USB A type, 1 x Audio Out Sound Port & 1 MIC IN Port
• Data transfer rate: Up to 12 Mbps
• Power Mode: Bus power

System Requirements:

• Available USB port

Operating System: Windows 98 / Me / 2000 / XP / VISTA / 7 / 8 / MAC OS 9.0 or 10.1 or later

Package Contents:

• Approx. 1 foot USB Audio Cable
• CD with User Manual

This Wireless Audio Adapter enables you to not only transmit audio from your PC or Notebook one side to the other side wirelessly but also transmit your voice back from the other side to PC or Notebook side in the same room. Without messy wires, just connect USB audio dongle to your PC or Notebook and connect wireless audio box to your stereo's speaker or microphone speak, you will enjoy the good quality of the sounds.

You can also use the mobile strap to hang up the wireless audio box. The audio box can be taken as a MP3 player for personal enjoyment or as a VoIP soft-phone application. It's a more flexible for users since they don't need to worry about the distance limitation.

This Wireless Audio Adapter adopt the RF 2.4G wireless solutions and bundled with USB transmitter dongle and receiver box. The transmitter distance can be extended up to 10 meters. It is also compatible with Windows®2000, XP SP2 and Vista™ 32/64-bit, 7 32/64-bit, 8 32/64-bit and Mac OS X v10.x or later operation system.

Function

Features:

• No more wires, and less cable clutter.
• Proprietary 2.4GHz Wireless solution.
• Easy system expansion with stereo sound support.
• Hands-free communication.
• Plug and play, quick and convenient use, no driver / software installation.
• Low power consumption / Low audio noise
• Support 1-1 Broadcasting
Volume controlled through your computer or manually on the adapter.

System Requirements:

• Intel Pentium III or AMD K6 500 CPU above.
• At least 128MB RAM
• At least 50 MB hard disk space.
• PC or Mac with one USB port.
• With one of the following operating systems: Windows® 2000, XP, Vista™, 7, 8, Mac OS X v10.x or later.

Package Contents:

• Wireless Audio Dongle x1
• Wireless Audio Box x1
• User's Manual x1
• AAA Battery x1
• Mobile Strap x1

Specifications: